Giá niêm yết: 3.079.650 ₫
Giá khuyến mại: 2.933.000 ₫
- Sản phẩm chính hãng 100%
- Bán hàng online toàn quốc
- Mua hàng trả góp lãi suất thấp
- Bảo hàng chính hãng
- Bảo hành tận nơi cho doanh nghiệp
- Giá cạnh tranh nhất thị trường
- Giao hàng nhanh chóng
- Giao hàng trước trả tiền sau COD
- Miễn phí giao hàng (bán kính 20km)
- Giao hàng và lắp đặt từ 8h00 - 21h30 hàng ngày, gồm cả thứ 7, CN, ngày lễ
Đo số Mét-Dò tín hiệu, Hàng chính hãng - TE-KRONE.
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L),
hunting RJ45 port(With RJ45);
Remote identifier RJ45 port (R)
The extra BNC and RJ11 converters are used to measure and
check the continuity of coaxial cable and telephone line.
(8). Length Measurement of Twin Twisted Cable
Scope: 1~350 M ( 3 ~200 ft)
Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft)(calibrating cable > 5 M)
Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft).(AMP, AT&T Class 5 cable)
Display: M or ft.
(9). Length Calibration:
User can set calibration factor by himself with a given length cable.
The length of calibrating cable is more than 5 M.
(10). Wire Sequence and Locating Cable Error:
Check errors such as open circuit, short circuit, reverse connection,
cross-over or cross-talk interference.
(11). Locating Cable
8 Remote identifier test jacks (ID 1≥ID 8).
(12). Automatic Time-delay Shut Off Time:
The tester does not operate for 30 minutes
Thương hiệu | Te-Krone |
Model | NF-308 |
Màu sắc | Đen |
Bảo hành | 12 tháng |
Loại sản phẩm | Bộ dụng cụ làm mạng |
Chất liệu | Kim loại |
Thương hiệu | Te-Krone |
Model | NF-308 |
Màu sắc | Đen |
Bảo hành | 12 tháng |
Loại sản phẩm | Bộ dụng cụ làm mạng |
Chất liệu | Kim loại |
Đo số Mét-Dò tín hiệu, Hàng chính hãng - TE-KRONE.
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L),
hunting RJ45 port(With RJ45);
Remote identifier RJ45 port (R)
The extra BNC and RJ11 converters are used to measure and
check the continuity of coaxial cable and telephone line.
(8). Length Measurement of Twin Twisted Cable
Scope: 1~350 M ( 3 ~200 ft)
Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft)(calibrating cable > 5 M)
Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft).(AMP, AT&T Class 5 cable)
Display: M or ft.
(9). Length Calibration:
User can set calibration factor by himself with a given length cable.
The length of calibrating cable is more than 5 M.
(10). Wire Sequence and Locating Cable Error:
Check errors such as open circuit, short circuit, reverse connection,
cross-over or cross-talk interference.
(11). Locating Cable
8 Remote identifier test jacks (ID 1≥ID 8).
(12). Automatic Time-delay Shut Off Time:
The tester does not operate for 30 minutes